Micro USB Cable for Raspberry Pi Pico

The Micro USB Cable for Raspberry Pi Pico is an essential accessory for anyone working with the RP2040-based Raspberry Pi Pico board. The Pico uses a Micro-USB connector for both power input and USB data, so a proper data-capable cable is required for programming firmware, running MicroPython, uploading C/C++ projects, viewing USB serial output and powering the board during development. Unlike charge-only cables, this USB-A Male to Micro-USB Male cable includes the USB data lines needed for Pico setup and code transfer. For power, the Raspberry Pi Pico receives nominal 5V on VBUS from the Micro-USB port when connected to a powered USB host, charger or power bank. The Pico board itself supports a wide input range through its power circuitry, but the USB connection is the simplest and most common way to begin development. This cable is suitable for everyday prototyping, classroom use, hobby electronics benches, robotics projects and IoT experiments where the Pico needs to communicate with a computer while being powered. The cable uses a black outer jacket and a compact Micro-USB plug that fits the Raspberry Pi Pico, Pico H, Raspberry Pi Zero family Micro-USB ports and many other compatible modules or devices. The commonly supplied 80 cm length is convenient for breadboard work and laptop programming without creating excessive cable clutter, while the approximately 3 mm cable diameter keeps it flexible for portable kits. Use it with Thonny IDE for MicroPython, Raspberry Pi Pico bootloader mode, USB serial monitors, circuit testing and general 5V USB power delivery for low-power development boards. In the box you get one Micro USB data cable. Pin note: the Micro-USB side provides VBUS, GND, D+ and D- connections; Pico programming requires the data pins to be present, so this cable is intended for data plus power use.